Technical Data
1) Main functions: recording video and audio at the same time, taking photos, recording audio alone, watch, web camera, usb drive
2) Video format: AVI, 1280*960 resolution
3) Picture format: JPEG, 3264*2488 resolution
4) Audio format: WAV
5) Internal memory: 2GB/4GB/8GB
6) USB interface: 2.0（Hs）
6) Charging time: about 2 hours
7 ) Battery use time: built-in Li battery, about 2 hours
8) Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/vista or above (Windows98 is excepted).
Operation
Switch on
Press the power-on/off button for some seconds, the blue light is on. In a few seconds, the blue light turns to red light and keeps on, indicating the device enters into standby mode.
Recording video and audio
Under standby mode, Press the Record/save button once. The red light blinks, it begins to record. Press the record/save button once again, the red light stopped blinking and keep on. The video file is saved and the device is back into standby mode.
Taking photo
Under standby mode, press the Mode switch button once, the blue light keeps on. It comes into photo taking standby mode. Press the power on/off/photo button once, the blue light will blinks one time. Three photos will be taken continually and saved. Then back into standby mode.
Recording audio alone
Press the Mode switch button two times under standby mode, the red and blue light keeps on and enters into audio alone-taking standby mode. Press the power on/off/audio button once, the red light keeps on and blue light flash slowly, it starts to take audio alone. Press the power on/off/audio button once again, the red and blue light keep on. The audio file is saved and back into audio alone-taking standby mode.
Attention:
1.To save power, when recording, the indicator light will be off automatically in 5 seconds. But the camera is still recording. If you need to confirm the condition or want to turn to the next operation. You just need to press any button to turn on the light.
2.In order to guarantee the audio effect, please donn’t cover the Mic phone.
Switch off
Under any mode, press the Power on/off button for a long time to power off.
Reset
Press the Power on/off button and Mode switch button at the same time to reset when the camera cann’t work normally.
Charging
Under the power-off mode, connect the camera to computer via USB cable and charge it or by charger. The red light flashes slowly while being charged. When the red light keeps on, it shows the camera is fully charged.
Attention: If the device is of low electricity, the device will save the file and turn off automatically.
Playback video
Connect the device to computer via USB cable and play back video on computer. Please make sure there is the playback software in the computer before connecting.
Web camera
The device can be used as web camera. Insert the user manual CD and Install the web camera driver software-PC camera driver before use. Then connect it to the computer under power on mode. At this time, the computer will appear a standard web camera.
Attention: According to the difference of computer configuration or system, the computer may be cann’t recognise the web camera function for the first time. If it happens, please remove the device and reconnect the computer under power on mode.
Setting time
It can dispay the taking time on the right corner of the video; you can reset the time as follows:
1) Connect the camera with computer
2) Create a new “Time.txt” file
3) Edit time as format:
2010. 12. 12. 12. 12. 12. Y (if you want to show the time)
2010. 12. 12. 12. 12. 12. N (if you do not want to show the time)
4) Copy the file to the root of the disk of the camera and pull the camera out of computer.
5) When starting the camera again next time, the time will be reset and updated.
Attention
1)You can check whether the device is fully charged while you can’t turn it on.
2)When taking video continually, the system will automatically generate a new video file after each operation.
3)In the adequate light environment, keep the camera vertical and stable, you can get best video and images within a certain distance.
4)Connect to computer: The time for computer with different system or configuration to identify the hardware is slightly different. During this period, please wait for a moment. If computer can’t identify, please make sure your operating system, drivers and USB interface cable are in good order. Then connect again.
5) The device has a function of memorize by using built-in high-capacity polymer lithium battery. Please charge the battery fully after you have used out the battery. By doing so, you can access the maximum capacity of the battery, reaching the standard working hours
6)The device is high-Tec electronic product; please do not use it under high impulsive force and shaking or in a strong magnetic field and weak electric field.
you can order is from China Electronic Wholesale
没有评论:
发表评论