1) Functions: taking photo, video and audio, take audio alone
2) Colors: black, silver, pink, orange and blue
3 Video: AVI, 640*480 resolution
4 Photo: JPEG, 1280*960 resolution
5 Audio: WAV
6 Memory: SD card, 1GB-8GB
7 USB2.0Hs
8 Charging time: 1.5-2 hours
9 Battery use time: built-in Li battery, 1 to 2 hours
10Operation systems: No need for driver installation if the operating system is
Windows ME/ 2000/ XP/ VISTA or above (windows98 is excepted)
Operation
Switch on
To start the device, please insert a Micro-SD card, then power on the device. The blue light and red light turns on, 2 seconds later, the blue light keeps on, it comes to standby mode.
Recording video and audio
Push the hold key downwards, press the record button for 2 seconds, the blue light will twinkle, it starts recording video and audio at the same time.Press the record button again, the blue light keeps on, the camera back to standby and the video file is saved.
Taking photo
Understand the standby mode, push the hold key downwards, press the record button,the yellow light flash one time and then turns off, indicating one photo is taken and thecamera back into standby mode.
Recording audio alone Under the standby mode, push the hold key upwards, the yellow light twinkles,indicating the audio is recorded. Push the hold key downwards, the audio will be saved and the camera back into standby mode, the blue light will keeps on.
Switch off
Under the standby mode or recording mode, push the power off button.
Attention: while recording, the file cannot be saved if power off direct.
Charging Under power off mode, connect the camera to computer via USB cable and charge it.The red light keeps on while being charged. When the red light turns off, it shows the camera is fully charged.
If the device if of low electricity, yellow light flashes slowly.
Playback video
Connect the camera to computer via USB cable and play back video on computer.
Please make sure there is the playback software in the computer before connecting.
Attention
1) When the device is lack of battery when taking video, the system will save the video data first, then shut down automatically.
2) When taking video continually, the system will automatically generate a new video file after each operation.
3) As the device has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly.
you can order is from China Electronic Wholesale
没有评论:
发表评论