1: USB interface 2: Microphone 3: Camera 4: Open button/audio key 5: Time setting 6: Mode button/ Operation button 7: Status Indicator
2. Introduction
This is the first HD-DV Watch, you can shoot high-definition video, taking high-quality photos, recording high-quality audio, With simple operation, elegant design, small size, it is easy to carry. It is an essential utility in business, education, security, media, justice, tourism, health care, living and other field.
2. Introduction
This is the first HD-DV Watch, you can shoot high-definition video, taking high-quality photos, recording high-quality audio, With simple operation, elegant design, small size, it is easy to carry. It is an essential utility in business, education, security, media, justice, tourism, health care, living and other field.
3. Operating
a. Parts Description:
a.1 Indicator: Status Indicator (7): blue light is the photo taking mode; red light for the video recording mode.
a.2 Button(4): Touch the button for the start.
a.3 Socket(1): The 2.5 – 4 pin USB socket is used to connect with computer or charger. It is the interface for data transfer and charging.
a.4 Microphone and camera: Microphone (2) is used to get the sound signal ;(3) is used to get the image signal.
a.5 Time setting: It is to set the time of this watch.
b. ON/OFF: Press button (4) for 2 seconds to start the device. It gets into the photo recording mode. Meanwhile the blue light indicator is on.
c. Take photo: In the photo-taking mode, the device enters into the standby status for photo-taking. Now the blue light is on. Press the button (6) for 1 second. One flashing blue light indicates that the device completes the photo taking and file saving job. Then it returns to the standby mode.
Note:Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.
Note:Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.
d. Record video: In the photo mode , long press operation button 2 seconds, the camera into the video mode , this time the red light flashes, in order to save system power and began recording in about 3S bell, the status indicator light will automatically switch off, this time the video is still at the video mode , and if the state recognized the camera, or a new operation, briefly press the operation button once to stop recording, save the file, this time to resume a long bright blue light.
e. Record sound:sart state, a long bright blue light, short the switch machine key (Figure 4), blue light began to blink, in order to save system power and began recording in about 3S bell, the status indicator light will automatically switch off, short the switch machine to save the and enter the camera recording standby mode, this time a long bright blue light
f. PC camera: Hold down the Operation button (Figure 6), you can connect the device with computer USB interface, you can enter the PC Camera (webcam) mode. In this mode, your camera can be used as a PC camera, with your friends online video chat, take photos, and so on.
Note:According to the computer system configuration or difference, the computer may not detect a camera function by once, if the computer can not enter the camera function, but into a Udisk. Please remove the camera and connect the camera to the computer again; If you are the first time to use the PC camera function on your computer, please install the drivers on the CD or dealers provided. Please connect the data cable to the device at first, then connect the other side to the Computer.
Note:According to the computer system configuration or difference, the computer may not detect a camera function by once, if the computer can not enter the camera function, but into a Udisk. Please remove the camera and connect the camera to the computer again; If you are the first time to use the PC camera function on your computer, please install the drivers on the CD or dealers provided. Please connect the data cable to the device at first, then connect the other side to the Computer.
g Connect the computer: In standby or OFF mode, you can connect the device with the computer. The computer will pop up a removable disk logo. There is an image file directory for: * Disk \ _REC \ 100MEDIA. During video recorder and computer transfer data, the blue light flashes rapidly. For the disconnection, please click ‘SAFELY REMOVE HARDWARE’ on the right bottom corner of the task bar. Then click to stop the ‘USB mass storage device’. Unplug the USB. The disconnection completes.
Note: According to the computer or system configuration, there will be slight difference for the time of identifying removable disk. Please be patient. During this period, please do not press the button to avoid the bad impact of computer hardware. If the computer does not identify the removable disk long time, disconnect and reconnect the device. If the computer is unable to identify the hardware yet, make sure your operating system, driver and USB cable are all in normal condition. Please make sure to disconnect the device in accordance with the normal process to avoid the possible damage for computer and recorder.
Note: According to the computer or system configuration, there will be slight difference for the time of identifying removable disk. Please be patient. During this period, please do not press the button to avoid the bad impact of computer hardware. If the computer does not identify the removable disk long time, disconnect and reconnect the device. If the computer is unable to identify the hardware yet, make sure your operating system, driver and USB cable are all in normal condition. Please make sure to disconnect the device in accordance with the normal process to avoid the possible damage for computer and recorder.
h.Charge: Connect to computer USB interface or charger. During the charging, the red light flashes slowly. When the battery is fully recharged, the red light stops flashing.
Note: The recorder is with built-in high-capacity lithium polymer battery. The battery is with no memory effect. It can be used and charged at anytime. But for the initial five times of charging, please charge battery to saturation after the battery runs out. It is to activate the battery maximum capacity and maintain the standard working time.
Note: The recorder is with built-in high-capacity lithium polymer battery. The battery is with no memory effect. It can be used and charged at anytime. But for the initial five times of charging, please charge battery to saturation after the battery runs out. It is to activate the battery maximum capacity and maintain the standard working time.
i.Set Time: The video recorder provides the function to display the video recording time in video file. The format is as following: Year – month - Day: minutes: seconds. Time setting process is as following:
h.1. Create a new file in ".TXT" format. Input the time in accordance with the following format 2008.07.15 16.10.28. The time is the current time at your location. Please double-check the text format in order to ensure the correct format..
h.2. Rename the new text file as "time.txt".
h.3. Connect the video recorder to the computer; wait until the computer appears a ‘REMOVABLE DISK’. Copy the “time.txt" file to this storage device root directory.
h.4. Disconnect this storage device. Restart the video recorder to complete the time setting.
h.5. The set time will be saved to the video recorder.
h.2. Rename the new text file as "time.txt".
h.3. Connect the video recorder to the computer; wait until the computer appears a ‘REMOVABLE DISK’. Copy the “time.txt" file to this storage device root directory.
h.4. Disconnect this storage device. Restart the video recorder to complete the time setting.
h.5. The set time will be saved to the video recorder.
j.roubleshooting:
When the storage space is insufficient, the blue light and red light flashes alternately about 5 seconds, then automatically save the current files and shut down. If you want to continue to use this video recorder, copy the necessary files to computer and delete the old documents in storage in order to free up enough storage space;
When the battery is insufficient, the blue and red light flash alternately about 5 seconds, then automatically save the current files and shut down. If you want to continue to use the recorder, please charge the battery.
If the video recorder stops responding due to improper operation or other unexpected reason, please press the mode button and operation buttons at the same time.
4. Parameters
4. Parameters
| Item | Parameters |
| Video format | AVI |
| Video encoding | M-JPEG |
| Video resolution | 1280*960VGA |
| Video frame rate | 30fps |
| Media playing software | Attached software of the operating system or Mainstream audio and video media playing software |
| Picture format | JPG |
| Picture pixels | 5M Pix |
| The ratio of image | 4:3 |
| Supporting system | Windows me/2000/xp/2003/vista；Mac O/S；Linux； |
| Battery capacity | 200mAh |
| Working time | About 70 minutes |
| Charging voltage | DC-5V |
| Interface type | Φ2.5 4 Pin USB |
| Storage support | Nand flash |
| Battery type | high-capacity lithium polymer |
5. Warning:
l Application: Please strictly abide relevant regulations and laws. This product should not be used for any illegal purposes. The user is fully responsible for its using purpose.
l Battery: If do not use this recording function after long time, please charged it fully before using.
l File security: This product is not a professional storage device. It does not guarantee the integrity and security of saved files. Please back up your important documents on the computer or other storage device timely.
l Video quality: This product is not a professional video recording device. It does not guarantee the video effect can meet your expectations.
l Operating temperature:0—40°C.
l Operating humidity: 20% -80%. This product does not have the waterproof function. So it can not work under the humid environment,。
l Shooting brightness: Do not expose the camera directly to strong light, such as the sun light, to avoid damage to optical devices.
l Cleaning: Do not use it under the environment with high dust density to avoid the contamination of camera lens or other components. It may affect the working of camera. The camera lens can be cleaned gently by paper or cloth which is used to clean glasses.
l Other matters: The product belongs to sophisticated electronic products. Please make sure that it is not damaged by strong impact and strong vibration. Do not use it in the place with strong magnetic or strong electric power.
l Note: Please contact with your local dealer for other matters.
you can order is from China Electronic Wholesale
没有评论:
发表评论