Operating
Parts Description:
1 Indicator:Red light (3) is power indicator. It is long-lighting when the power is on, the follow-up notes to the various functions of the state of the instructions, do not have further description to the state of the light. Blue light (2) is the shooting mode indicator; Yellow light (4) is the Sound recording model indicator.
1 Indicator:Red light (3) is power indicator. It is long-lighting when the power is on, the follow-up notes to the various functions of the state of the instructions, do not have further description to the state of the light. Blue light (2) is the shooting mode indicator; Yellow light (4) is the Sound recording model indicator.
2 Switch Description: Power switch (5) is marked with "ON" and "OFF" in two side. Switch to "ON" side to power on and “OFF” side to power off.; Mode switch (10) is marked " AUDIO "and" VIDEO " for the change between the “video recording” and “Sound recording” functions.
3 Button(1): Touch the button to turn on, turn off, start,stop, video recording, photo, sound recording.
4 Socket: TF card slot (6) is used to insert the Micro SD (TF) card ; Mini USB socket (7) is used to connect computer or charger. It is the interface for data transfer and charging
.5 Microphone and camera: Microphone (9) is used to get the sound signal ;Camera(8) is used to get the image signal
b. ON/OFF: Set the power switch to "ON" and press the button for 1 second to turn on the device. The device enters into the shooting mode or the sound recording mode. Then the mode indicator is on. In any status, press the button for 4 seconds, all lights will be turned off. The video recorder will automatically save the current file and shutdown.
c. Mode change: Change the mode switch and press the button, the product will enters the different function, The methods as follows:
3.1 Photo function:The photo function indicator is yellow light, To access this function, you should put the mode switch to "Video" position, the device enters into the standby status. Now the yellow light is on. You can taking photo at any time; If the mode switch on the "Video "position, but the blue light flash or keep on, it means that the device is in the video function, need to press button 2 seconds and exit the video function.
3.2 Video function: In the video function, there are two status, the blue indicator keep light on standby status and flash on recording status, To access this function, you should put the switch mode button to "Video" position, then press button 2 seconds to enter the function, after release the button, the yellow light is off, the blue light on. To exit from the video function, you can directly change the mode switch or press the button for 2 seconds.
3.3 Audio function: In the audio function, when the device standby, the yellow and blue lights are on at the same time. When the device working, the blue indicator keep light and the yellow indicator flashs. To access this feature, you should put the mode switch to "Audio" position.
Note: Change the mode when the device is working, it will automatically save the current recording file, then switch to the target function.
c. Mode change: Change the mode switch and press the button, the product will enters the different function, The methods as follows:
3.1 Photo function:The photo function indicator is yellow light, To access this function, you should put the mode switch to "Video" position, the device enters into the standby status. Now the yellow light is on. You can taking photo at any time; If the mode switch on the "Video "position, but the blue light flash or keep on, it means that the device is in the video function, need to press button 2 seconds and exit the video function.
3.2 Video function: In the video function, there are two status, the blue indicator keep light on standby status and flash on recording status, To access this function, you should put the switch mode button to "Video" position, then press button 2 seconds to enter the function, after release the button, the yellow light is off, the blue light on. To exit from the video function, you can directly change the mode switch or press the button for 2 seconds.
3.3 Audio function: In the audio function, when the device standby, the yellow and blue lights are on at the same time. When the device working, the blue indicator keep light and the yellow indicator flashs. To access this feature, you should put the mode switch to "Audio" position.
Note: Change the mode when the device is working, it will automatically save the current recording file, then switch to the target function.
d. Take photo: In the photo-taking function, the device enters into the standby status for photo-taking. Now the blue light is on. Press the button. The yellow light flashes one time to complete the photo taking and image saving. Then it returns to the standby status. This function is 3 piece continuous shooting.Note:You must ensure that TF card is in the card socket (6) and it supports this device; Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera
e. Record video: In the video function, the device enters into the standby status.Now the blue light is on. Press the button for short time to start the video recording. The blue light flashes slowly. Pressing the button for short time again to stop recording and save the file. Afterward the blue light returns to ON mode; In order to ensure the safety and the size of the file, the system will automatically save file every 50 minutes once, and continue the video recording.Note: In order to ensure good sound effect of recording, do not block the microphone hole. The other operation notes are as same as Point 4.
f. Record sound: In the audio function, the device enters into the standby status.Now the yellow and the blue light are on at the same time. Press the button for short time to start the sound recording. The yellow light flashes slowly. Pressing the button for short time again to stop recording and save the file. Afterward the yellow light returns to ON mode.
g. PC camera: When the power is on, you can connect the device with computer USB interface, you can enter the PC Camera (webcam) mode. In this mode, your camera can be used as a PC camera, with your friends online video chat, take photos, and so on.
Note:According to the computer system configuration or difference, the computer may not detect a camera function by once, if the computer can not enter the camera function, but into a Udisk. Please remove the camera and connect the camera to the computer again; If you are the first time to use the PC camera function on your computer, please install the drivers on the CD or dealers provided.
g. PC camera: When the power is on, you can connect the device with computer USB interface, you can enter the PC Camera (webcam) mode. In this mode, your camera can be used as a PC camera, with your friends online video chat, take photos, and so on.
Note:According to the computer system configuration or difference, the computer may not detect a camera function by once, if the computer can not enter the camera function, but into a Udisk. Please remove the camera and connect the camera to the computer again; If you are the first time to use the PC camera function on your computer, please install the drivers on the CD or dealers provided.
h.Removable Disk: In the shutdown mode, connect a computer USB interface, enter into the removable disk function, at this time, the computer will pop up movable disk logo, the media file directory as follows: * : \ _REC \ 100MEDIA ; During the camera and computer transfer data,the yellow light flashes rapidly; need to uninstall the camera, please click on the task bar on the bottom right corner of the icon to the management of removable devices, uninstall the inside removable storage devices, when the system recognizes the hardware can be safely pulled out, and then disconnect the camera and computer connections.
Note: According to a computer or system configuration differences, the time to identify removable disk will be slightly different, please be patient, this period is best not to carry out the operation of the camera, so as to avoid the impact of the computer hardware identification. If did not identify to a removable disk for a long time, try to re-insert, if still unable to identify the hardware, make sure that your operating system, driver, usb interface cable are all normal; please uninstall the hardware with the normal process, so as to avoid to damage the computer or camera.The recorder is with built-in high-capacity lithium polymer battery. The battery is with no memory effect. It can be used and charged at anytime. But for the initial five times of charging, please charge battery to saturation after the battery runs out. It is to activate the battery maximum capacity and maintain the standard working time. In order to maximize the capacity of storage battery, please continue to charge for 30 minutes to 1 hour after the indicator light long bright.
Note: According to a computer or system configuration differences, the time to identify removable disk will be slightly different, please be patient, this period is best not to carry out the operation of the camera, so as to avoid the impact of the computer hardware identification. If did not identify to a removable disk for a long time, try to re-insert, if still unable to identify the hardware, make sure that your operating system, driver, usb interface cable are all normal; please uninstall the hardware with the normal process, so as to avoid to damage the computer or camera.The recorder is with built-in high-capacity lithium polymer battery. The battery is with no memory effect. It can be used and charged at anytime. But for the initial five times of charging, please charge battery to saturation after the battery runs out. It is to activate the battery maximum capacity and maintain the standard working time. In order to maximize the capacity of storage battery, please continue to charge for 30 minutes to 1 hour after the indicator light long bright.
I.Charge: Connect to computer USB interface or charger. During the charging, the blue light flashes slowly. When the battery is fully recharged, the blue light stops flashing.
Note: J.Setup time:the video recorder provides the function to display the video record time in video file, you can set the time and the time display or not according to actual needs; the time display format: "year. month. Day Hours: minutes: seconds" , setup times are as follows:
a. Turn off the camera—>to connect the computer—> open the removable disk—> click the right mouse button on blank space of the root directory of the device —>move the cursor on "New" option of the pop-up menu —> select "Text Document"—> named "time" to the text document, need to pay attention to its extension name is ". txt" —> completion of setting up time file; you can set up in accordance with the above steps on your desktop, other disk partition, under the other folder and then copy to a removable disk root directory.
b. Open the "time" text document, input the time settings string, the string is composed of "year. month.Day hours.minutes.seconds show/hide flag" ,set-up times are as follows:
With time shows: 2009.01.01 12.01.01 Y
Do not show time: 2009.01.01 12.01.01 N
The above time string are the time you want to set, attention to the space between year Month day and Hours minutes seconds, the "Y" and "N" is a flag of time display, "Y" means show the time string on the right corner of the video;"N "mean hide the time string.
c. The file of set-up time has been copied to the root directory, uninstall hardware, boot, complete set-up time.
d. The time set up will be saved to the camera inside.
Note: J.Setup time:the video recorder provides the function to display the video record time in video file, you can set the time and the time display or not according to actual needs; the time display format: "year. month. Day Hours: minutes: seconds" , setup times are as follows:
a. Turn off the camera—>to connect the computer—> open the removable disk—> click the right mouse button on blank space of the root directory of the device —>move the cursor on "New" option of the pop-up menu —> select "Text Document"—> named "time" to the text document, need to pay attention to its extension name is ". txt" —> completion of setting up time file; you can set up in accordance with the above steps on your desktop, other disk partition, under the other folder and then copy to a removable disk root directory.
b. Open the "time" text document, input the time settings string, the string is composed of "year. month.Day hours.minutes.seconds show/hide flag" ,set-up times are as follows:
With time shows: 2009.01.01 12.01.01 Y
Do not show time: 2009.01.01 12.01.01 N
The above time string are the time you want to set, attention to the space between year Month day and Hours minutes seconds, the "Y" and "N" is a flag of time display, "Y" means show the time string on the right corner of the video;"N "mean hide the time string.
c. The file of set-up time has been copied to the root directory, uninstall hardware, boot, complete set-up time.
d. The time set up will be saved to the camera inside.
k. Troubleshooting:
When the storage space is insufficient, the blue light and yellow light flashes alternately about 5 seconds, then automatically save the current files and shut down. If you want to continue to use this video recorder, copy the necessary files to computer and delete the old documents in storage in order to free up enough storage space;
When the battery is insufficient, the blue and yellow light flash alternately about 5 seconds, then automatically save the current files and shut down. If you want to continue to use the recorder, please charge the battery.
If the video recorder stops responding due to improper operation or other unexpected reason, please turn off the power and restart it .
When the storage space is insufficient, the blue light and yellow light flashes alternately about 5 seconds, then automatically save the current files and shut down. If you want to continue to use this video recorder, copy the necessary files to computer and delete the old documents in storage in order to free up enough storage space;
When the battery is insufficient, the blue and yellow light flash alternately about 5 seconds, then automatically save the current files and shut down. If you want to continue to use the recorder, please charge the battery.
If the video recorder stops responding due to improper operation or other unexpected reason, please turn off the power and restart it .
4. Parameters
| Item | Parameters |
| Video format | AVI |
| Video encoding | M-JPEG |
| Video resolution | 640*480 VGA |
| Video frame rate | 30fps ± 1 fps |
| Media playing software | Attached software of the operating system or Mainstream audio and video media playing software, recommend Kmplayer |
| Picture format | JPG |
| Picture pixels | 8M Pix |
| The ratio of image | 4:3 |
| Supporting system | Windows me/2000/xp/2003/vista；Mac OS10.4； |
| charge pressure | DC-5V |
| Interface type | Mini 5Pin USB |
| Storage support | Micro SD Card (TF Card) |
| Battery type | high-capacity lithium polymer |
5. Warning:
Application: Please strictly abide relevant regulations and laws. This product should not be used for any illegal purposes. The user is fully responsible for its using purpose.
Battery: If do not use this recording function after long time, please charged it fully before using.
File security: This product is not a professional storage device. It does not guarantee the integrity and security of saved files. Please back up your important documents on the computer or other storage device timely.
Video quality: This product is not a professional video recording device. It Does not guarantee the effect of the video file to have the professional quality
Operating temperature: 0—40°C. For the extension of life, it is best used at room temperature.
Operating humidity: 20% -80%. This product does not have the waterproof function. So it can not work under the humid environment,。
Shooting brightness: Do not expose the camera directly to strong light, such as the sun light, to avoid damage to optical devices.
Cleaning: Do not use it under the environment with high dust density to avoid the contamination of camera lens or other components
you can order is from China Electronic Wholesale
没有评论:
发表评论