Technical Data
1)Functions: taking photo, video and audio, USB drive
2)Video: AVI, 640*480 resolution
3)Photo: JPEG, 1280*960 resolution
4)Internal Memory: 2GB/4GB/8GB
5)USB：2.0（Hs）
6)Charging time: 2-3 hours
7)Battery use time: built-in Li battery, 1-2 hours
8)Operation systems: No need for driver installation if the operating system is Windows ME/ 2000/ XP/ Vista or above (windows98 is excepted)
Operation
Switch on
Press on/off button for some seconds until the orange light is on.
Recording video and audio
1)Press the record/photo button for some seconds, the yellow light will flash 3 times, then it turns off, the camera starts to record video and audio.
2)Press the record/ photos button again, the yellow light turns on, it stops recording and save the data, the camera back to standby mode.
Taking photo
Under standby mode, press record/ photo button one time shortly, the yellow light flash one time then off, indicating one photo is taken, then the camera back to standby mode again.
Switch off
Under standby mode or recording mode, press the power off button for some seconds.
Attention: while recording, the file cannot be saved if power off direct.
Reset
Under incorrect operation or a certain reason, the device may stop working, at this time, insert the clip into the reset hole to reset, then the device is at power off mode.
Charging
Under power off or standby mode, connect the camera to computer via USB cable and charge it. The yellow light keeps on while being charged. When it turns off, it shows the camera is fully charged.
If the device if of low electricity, yellow light flashes slowly.
Playback
Connect the camera to computer via USB cable and play back video on computer. Please make sure there is a player in the computer before connecting.
Setting time
When using the device for the first time, you can reset the time through the following way:
1)Connect the camera with computer
2)Create a new “ time.txt” file
3)Edit time as format: 2009.12.12 12.12.12 in the file
4)Copy the file to the root of the disk of the camera
5) When starting the camera again next time, the time will be simultaneous as the time file.
Attention
1)When the device is lack of battery when taking video, the system will save the video data first, then shut down automatically.
2)When taking video continually, the system will automatically generate a new video file after each operation.
3)As the device has built-in high-capacity polymer lithium battery, so it has a memory effect .We advise in the first 5 times of usage, charge the battery fully after the battery is out of use, so that the battery can work with its max working hours perfectly.
you can order is from China Electronic Wholesale
没有评论:
发表评论